School of Manufacturing and Automation
INSP 012 - Magnetic Particle Enhanced Workshop
Course Description:
This Magnetic Particle Workshop (MPI) provides hands-on training and experience for Non-Destructive Testing (NDT) inspectors who are already acquainted with the theory. It serves to familiarize Canadian General Standards Board (CGSB) exam candidates with the equipment your exams will be conducted on. Workshops will be recognized by the CGSB as work experience.
0 credits
Prerequisite(s):
One of:
Technical Requirements
Course equivalencies taken at other institutions will be accepted but prospective students must contact the NDT department for approvals.
Pre-requisites are subject to change at the discretion of the accreditation body.
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
INSP 013 - X-Ray Fluorescence (XRF) Level I
Course Description:
This first level X-Ray fluorescence (XRF) course provides a general understanding of XRF principles. Learn how to use XRF for Positive Material Identification (PMI) applications, including sources of error and how to minimize them. Instruction includes hands on use of the tube-based hand held XRF device. This course covers all material needed to write the Natural Resources Canada XRF 1 exam. We will administer the NRCan Level 1 XRF exam and submit the necessary application forms. Pre-Study will be required along with all application forms filled out prior to the course and exam.
0 credits
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
INSP 100 - Gamma Camera Maintenance
Course Description:
This course is designed to provide the necessary theoretical and interactive/ simulated “hands on” training to perform gamma -ray exposure device maintenance and inspections as required by the Canadian Nuclear Safety Commission (CNSC) in Canada or applicable Federal Regulatory Body/Agency.
0 credits
Required Materials
Student must have certification in CEDO.
Technical Requirements
Student must have certification in CEDO.
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
INSP 110 - Magnetic Particle Level II Practical Exam
Course Description:
SAIT offers this Magnetic Particle Level II practical exam as part of the Canadian General Standards Board examination process for non-destructive testing (NDT).
0 credits
Required Materials
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
Technical Requirements
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
INSP 114 - Magnetic Particle Level III Theory Exam
Course Description:
SAIT offers this Magnetic Particle Level III theory exam as part of the Canadian General Standards Board examination process for non-destructive testing (NDT).
0 credits
Required Materials
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
Technical Requirements
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
INSP 115 - Liquid Penetrant Inspection Lab Component
Course Description:
This Liquid Penetrant Inspection Lab introduces you to the “practical” learning component of the Liquid Penetrant Inspection (LPI) Level I and II course. Designed to train Non-Destructive Testing (NDT) students to perform calibrations and physically inspect parts in a lab setting, this course is intended to complement on-line theory based training.
0 credits
Prerequisite(s):
- One of:
- CODE 118
- CODE 270
- EXAM 109
Required Materials
Students must have successfully completed Grade 10 Math or equivalent.
If students cannot produce credentials to demonstrate math proficiency, they must write the Math 10-C exam at SAIT. To book this test, please contact the SAIT Testing Centre at testing@sait.ca.
At least three months field experience in Liquid Penetrant Inspection is recommended. For inquiries for CGSB certification, contact Natural Resources Canada. Learners must provide their own calculator with scientific functions which will be used throughout the course. Learners must supply their own safety boots for the lab component of this course. Textbooks are included in the course costs.
Upon successfully completing the 16-hour practical component, the Learner will recieve a confirmation letter of success that must be submitted to NRCan along with a confirmation letter from the on-line component of this course to be eligible to write the Canadian General Standards Board (CGSB) certification exam.
Contact ma.info@sait.ca or 403-284-8641 for more information.
Technical Requirements
Students must have successfully completed Grade 10 Math or equivalent.
If students cannot produce credentials to demonstrate math proficiency, they must write the Math 10-C exam at SAIT. To book this test, please contact the SAIT Testing Centre at testing@sait.ca.
At least three months field experience in Liquid Penetrant Inspection is recommended. For inquiries for CGSB certification, contact Natural Resources Canada. Learners must provide their own calculator with scientific functions which will be used throughout the course. Learners must supply their own safety boots for the lab component of this course. Textbooks are included in the course costs.
Upon successfully completing the 16-hour practical component, the Learner will recieve a confirmation letter of success that must be submitted to NRCan along with a confirmation letter from the on-line component of this course to be eligible to write the Canadian General Standards Board (CGSB) certification exam.
Contact ma.info@sait.ca or 403-284-8641 for more information.
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
INSP 117 - Ultrasonics Level I Laboratory
Course Description:
This practical Ultrasonics Level I Laboratory (UT) is designed to complement the on-line theory training portion of the Ultrasonics Inspection course.
0 credits
Prerequisite(s):
- One of:
- CODE 118
- CODE 270
- EXAM 109
Required Materials
Students must have successfully completed Grade 10 Math or equivalent.
If students cannot produce credentials to demonstrate math proficiency, they must write the Math 10-C exam at SAIT. To book this test, please contact the SAIT Testing Centre at testing@sait.ca.
At least three months field experience in Ultrasonic Inspection is recommended. For inquiries for CGSB certification, contact Natural Resources Canada. Learners must provide their own calculator with scientific functions which will be used throughout the course. Learners must supply their own safety boots for the lab component of this course. Textbooks are included in the course costs.
Upon successfully completing the 16-hour practical component, the Learner will receive a confirmation letter of success that must be submitted to NRCan along with a confirmation letter from the on-line component of this course to be eligible to write the Canadian General Standards Board (CGSB) certification exam.
Contact ma.info@sait.ca or 403-284-8641 for more information.
Technical Requirements
Students must have successfully completed Grade 10 Math or equivalent.
If students cannot produce credentials to demonstrate math proficiency, they must write the Math 10-C exam at SAIT. To book this test, please contact the SAIT Testing Centre at testing@sait.ca.
At least three months field experience in Ultrasonic Inspection is recommended. For inquiries for CGSB certification, contact Natural Resources Canada. Learners must provide their own calculator with scientific functions which will be used throughout the course. Learners must supply their own safety boots for the lab component of this course. Textbooks are included in the course costs.
Upon successfully completing the 16-hour practical component, the Learner will receive a confirmation letter of success that must be submitted to NRCan along with a confirmation letter from the on-line component of this course to be eligible to write the Canadian General Standards Board (CGSB) certification exam.
Contact ma.info@sait.ca or 403-284-8641 for more information.
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
INSP 118 - Ultrasonics Level I Theory
Course Description:
This ultrasonics theory course for Non-Destructive Testing (NDT) examines fundamental properties of sounds, wave propagation, generation of ultrasonic waves, test equipment and test methods. Instruction is provided in calibration, performance tests, weld inspection, specification and result interpretation.
0 credits
Prerequisite(s):
- One of:
- CODE 118
- CODE 270
- EXAM 109
Required Materials
Students must have successfully completed Grade 10 Math or equivalent.
If students cannot produce credentials to demonstrate math proficiency, they must write the Math 10-C exam at SAIT. To book this test, please contact the SAIT Testing Centre at testing@sait.ca.
The online format of D2L gives the Learner the opportunity to discuss important issues, access websites and review materials covered in the course. This course is the first part of the required 40 hours of training per the NRCan guidelines. To be certified under the Canadian General Standards Board (CGSB) certification scheme students need to take the 16 hour hands-on component INSP-117 separately.
Contact ma.info@sait.ca or 403-284-8641 for more information.
Special Notes for Distance Courses
If you are not able to complete the online course within the allotted 6 weeks you have the option to purchase an Extension. An extension must be purchased 2 business days before your course end date.
- Course equivalencies taken at other institutions will be accepted but prospective students must contact the NDT department for approvals.
- Pre-requisites are subject to change at the discretion of the accreditation body.
Technical Requirements
Students must have successfully completed Grade 10 Math or equivalent.
If students cannot produce credentials to demonstrate math proficiency, they must write the Math 10-C exam at SAIT. To book this test, please contact the SAIT Testing Centre at testing@sait.ca.
The online format of D2L gives the Learner the opportunity to discuss important issues, access websites and review materials covered in the course. This course is the first part of the required 40 hours of training per the NRCan guidelines. To be certified under the Canadian General Standards Board (CGSB) certification scheme students need to take the 16 hour hands-on component INSP-117 separately.
Contact ma.info@sait.ca or 403-284-8641 for more information.
Special Notes for Distance Courses
If you are not able to complete the online course within the allotted 6 weeks you have the option to purchase an Extension. An extension must be purchased 2 business days before your course end date.
- Course equivalencies taken at other institutions will be accepted but prospective students must contact the NDT department for approvals.
- Pre-requisites are subject to change at the discretion of the accreditation body.
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
INSP 123 - Magnetic Particle Inspection Laboratory
Course Description:
The Magnetic Particle Inspection Laboratory (MPI) is a hands-on course designed to complement the on-line theory training portion of the Magnetic Particle Inspection course.
0 credits
Prerequisite(s):
- One of:
- CODE 118
- CODE 270
- EXAM 109
Required Materials
Students must have successfully completed Grade 10 Math or equivalent.
If students cannot produce credentials to demonstrate math proficiency, they must write the Math 10-C exam at SAIT. To book this test, please contact the SAIT Testing Centre at testing@sait.ca.
At least three months field experience in Magnetic Particle Inspection is recommended. For inquiries for CGSB certification, contact Natural Resources Canada. Learners must provide their own calculator with scientific functions which will be used throughout the course. Learners must supply their own safety boots for the lab component of this course. Textbooks are included in the course costs.
Upon successfully completing this 16-hour practical component, the Learner will receive a confirmation letter of success that must be submitted to NRCan along with a confirmation letter from the on-line component of this course to be eligible to write the Canadian General Standards Board (CGSB) certification exam.
Contact ma.info@sait.ca or 403-284-8641 for more information.
Technical Requirements
Students must have successfully completed Grade 10 Math or equivalent.
If students cannot produce credentials to demonstrate math proficiency, they must write the Math 10-C exam at SAIT. To book this test, please contact the SAIT Testing Centre at testing@sait.ca.
At least three months field experience in Magnetic Particle Inspection is recommended. For inquiries for CGSB certification, contact Natural Resources Canada. Learners must provide their own calculator with scientific functions which will be used throughout the course. Learners must supply their own safety boots for the lab component of this course. Textbooks are included in the course costs.
Upon successfully completing this 16-hour practical component, the Learner will receive a confirmation letter of success that must be submitted to NRCan along with a confirmation letter from the on-line component of this course to be eligible to write the Canadian General Standards Board (CGSB) certification exam.
Contact ma.info@sait.ca or 403-284-8641 for more information.
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
INSP 124 - Magnetic Particle Inspection Theory
Course Description:
This online inspection course for Non-Destructive Testing (NDT) provides an overview of the theory of the Magnetic Particle method. This method allows technicians to locate defects in ferro-magnetic materials. Lessons include the theoretical and procedural aspects of working with various pieces of equipment and accessories and how to follow inspection procedures and standards outlined by industry and regulatory groups.
0 credits
Prerequisite(s):
- One of:
- CODE 118
- CODE 270
- CODE 270
Required Materials
Students must have successfully completed Grade 10 Math or equivalent.
If students cannot produce credentials to demonstrate math proficiency, they must write the Math 10-C exam at SAIT. To book this test, please contact the SAIT Testing Centre at testing@sait.ca.
The online format of D2L gives the Learner the opportunity to discuss important issues, access websites and review materials covered in the course. This 24-hour course completed over 6 weeks is the first part of the required 40 hours of training per the NRCan guidelines. To be certified under the Canadian General Standards Board (CGSB) certification scheme students need to take the 16-hour hands-on component INSP-123
Contact ma.info@sait.ca or 403-284-8641 for more information.
Special Notes for Distance Courses
For a complete list of material and associated fees, click Register below.
An extension must be purchased 2 business days before your end date.
- Course equivalencies taken at other institutions will be accepted but prospective students must contact the NDT department for approvals.
- Pre-requisites are subject to change at the discretion of the accreditation body.
Technical Requirements
Students must have successfully completed Grade 10 Math or equivalent.
If students cannot produce credentials to demonstrate math proficiency, they must write the Math 10-C exam at SAIT. To book this test, please contact the SAIT Testing Centre at testing@sait.ca.
The online format of D2L gives the Learner the opportunity to discuss important issues, access websites and review materials covered in the course. This 24-hour course completed over 6 weeks is the first part of the required 40 hours of training per the NRCan guidelines. To be certified under the Canadian General Standards Board (CGSB) certification scheme students need to take the 16-hour hands-on component INSP-123
Contact ma.info@sait.ca or 403-284-8641 for more information.
Special Notes for Distance Courses
For a complete list of material and associated fees, click Register below.
An extension must be purchased 2 business days before your end date.
- Course equivalencies taken at other institutions will be accepted but prospective students must contact the NDT department for approvals.
- Pre-requisites are subject to change at the discretion of the accreditation body.
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
INSP 128 - Radiography Level I Laboratory
Course Description:
This practical Radiography Level I Laboratory (RT) is designed to complement the on-line theory training portion of the Radiography Inspection course.
0 credits
Prerequisite(s):
- One of:
- CODE 118
- CODE 270
- EXAM 109
- One of:
- INSP 119
- INSP 133
- INSP 220
Required Materials
Students must have successfully completed Grade 10 Math or equivalent.
If students cannot produce credentials to demonstrate math proficiency, they must write the Math 10-C exam at SAIT. To book this test, please contact the SAIT Testing Centre at testing@sait.ca.
At least three months field experience in Radiographic Inspection is recommended. For inquiries for CGSB certification, contact Natural Resources Canada. Learners must provide their own calculator with scientific functions which will be used throughout the course. Learners must supply their own safety boots for the lab component of this course. Textbooks are included in the course costs.
Upon successfully completing this 16-hour practical component, the learner will receive a confirmation letter of success that must be submitted to NRCan along with a confirmation letter from the on-line component of this course to be eligible to write the CGSB certification exam.
Contact ma.info@sait.ca or 403-284-8641 for more information.
Technical Requirements
Students must have successfully completed Grade 10 Math or equivalent.
If students cannot produce credentials to demonstrate math proficiency, they must write the Math 10-C exam at SAIT. To book this test, please contact the SAIT Testing Centre at testing@sait.ca.
At least three months field experience in Radiographic Inspection is recommended. For inquiries for CGSB certification, contact Natural Resources Canada. Learners must provide their own calculator with scientific functions which will be used throughout the course. Learners must supply their own safety boots for the lab component of this course. Textbooks are included in the course costs.
Upon successfully completing this 16-hour practical component, the learner will receive a confirmation letter of success that must be submitted to NRCan along with a confirmation letter from the on-line component of this course to be eligible to write the CGSB certification exam.
Contact ma.info@sait.ca or 403-284-8641 for more information.
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
INSP 129 - Radiography Level I Theory
Course Description:
This online radiography theory course for Non-Destructive Testing (NDT) covers the physical principles of penetration radiation, sources, detection, process and weld interpretation. Focus is placed upon practical applications and theory for Level 1 Canadian General Standards Board (CGSB) certification. Radiation safety with x-ray tubes, required by the Alberta Government codes, is also covered.
0 credits
Prerequisite(s):
- One of:
- CODE 118
- CODE 270
- CODE 270
- EXAM 109
- One of:
- INSP 119
- INSP 133
- INSP 220
Required Materials
Students must have successfully completed Grade 10 Math or equivalent.
If students cannot produce credentials to demonstrate math proficiency, they must write the Math 10-C exam at SAIT. To book this test, please contact the SAIT Testing Centre at testing@sait.ca.
The online format of D2L gives the learner the opportunity to discuss important issues, access websites and review materials covered in the course. This course is the first part of the required 40 hours of training per the NRCan guidelines. To be certified under the Canadian General Standards Board (CGSB) certification scheme students need to take the 16-hour hands-on component INSP-128 separately.
Special Notes for Distance Courses
If you are unable to complete the course within the 6 wk timeline, you have the option to purchase an extension. This extension must be purchased 2 business days before your course end date. If you are not able to complete the online course within the allotted 6 weeks you have the option to purchase an Extension. An extension must be purchased 2 business days before your course end date.
Contact ma.info@sait.ca or 403-284-8641 for more information.
- Course equivalencies taken at other institutions will be accepted but prospective students must contact the NDT department for approvals.
- Pre-requisites are subject to change at the discretion of the accreditation body.
Technical Requirements
Students must have successfully completed Grade 10 Math or equivalent.
If students cannot produce credentials to demonstrate math proficiency, they must write the Math 10-C exam at SAIT. To book this test, please contact the SAIT Testing Centre at testing@sait.ca.
The online format of D2L gives the learner the opportunity to discuss important issues, access websites and review materials covered in the course. This course is the first part of the required 40 hours of training per the NRCan guidelines. To be certified under the Canadian General Standards Board (CGSB) certification scheme students need to take the 16-hour hands-on component INSP-128 separately.
Special Notes for Distance Courses
If you are unable to complete the course within the 6 wk timeline, you have the option to purchase an extension. This extension must be purchased 2 business days before your course end date. If you are not able to complete the online course within the allotted 6 weeks you have the option to purchase an Extension. An extension must be purchased 2 business days before your course end date.
Contact ma.info@sait.ca or 403-284-8641 for more information.
- Course equivalencies taken at other institutions will be accepted but prospective students must contact the NDT department for approvals.
- Pre-requisites are subject to change at the discretion of the accreditation body.
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
INSP 130 - Liquid Penetrant Level II Theory Exam
Course Description:
SAIT offers this Liquid Penetrant Level II theory exam as part of the Canadian General Standards Board examination process for non-destructive testing (NDT).
0 credits
Required Materials
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
Technical Requirements
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
INSP 132 - Liquid Penetrant Level II Practical Exam
Course Description:
SAIT offers this Liquid Penetrant Level II practical exam as part of the Canadian General Standards Board examination process for non-destructive testing (NDT).
0 credits
Required Materials
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
Technical Requirements
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
INSP 133 - Radiography Safety
Course Description:
Working in industrial radiography is rewarding but can also be hazardous. To mitigate these hazards, individuals must have a basic understanding of radiation safety principles. This course is a mandatory pre-requisite for learners wishing to obtain Radiography Level I training without previous certification or training in an equivalent Radiation Safety course (i.e. Certified Exposure Device Operator). This course will prepare the learner to operate equipment associated with radiography in a safe and competent manner and in accordance with the applicable radiation safety regulations.
0 credits
Technical Requirements
CONTINUING EDUCATION CALENDAR
Please contact 403-284-8641 or ma.info@sait.ca for more information.
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
INSP 134 - Liquid Penetrant Level III Theory Exam
Course Description:
SAIT offers this Liquid Penetrant Level III theory exam as part of the Canadian General Standards Board examination process for non-destructive testing (NDT).
0 credits
Required Materials
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
Technical Requirements
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
INSP 140 - Ultrasonics Level I Theory Exam
Course Description:
SAIT offers this Ultrasonics Level I theory exam as part of the Canadian General Standards Board examination process for non-destructive testing (NDT).
0 credits
Required Materials
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
Technical Requirements
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
INSP 142 - Ultrasonics Level I Practical Exam
Course Description:
SAIT offers this Ultrasonics Level I practical exam as part of the Canadian General Standards Board examination process for non-destructive testing (NDT).
0 credits
Required Materials
CONTINUING EDUCATION CALENDARExams are available Monday to Friday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ndt@sait.ca
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
INSP 143 - Visual Inspection Level 2 Theory
Course Description:
In this online course learners are introduced to Visual Testing (VT) methods which allows technicians to locate defects in many materials. Learners work with various equipment and accessories and follow inspection procedures and standards outlined by industry and regulatory groups.
0 credits
Prerequisite(s):
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
INSP 144 - Ultrasonics Level II Theory Exam
Course Description:
SAIT offers this Ultrasonics Level II theory exam as part of the Canadian General Standards Board examination process for non-destructive testing (NDT).
0 credits
Required Materials
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
Technical Requirements
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
INSP 146 - Ultrasonics Level II Practical Exam
Course Description:
SAIT offers this Ultrasonics Level II practical exam as part of the Canadian General Standards Board examination process for non-destructive testing (NDT).
0 credits
Required Materials
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
Technical Requirements
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
INSP 148 - Ultrasonics Level III Theory Exam
Course Description:
SAIT offers this Ultrasonics Level III theory exam as part of the Canadian General Standards Board examination process for non-destructive testing (NDT).
0 credits
Required Materials
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
Technical Requirements
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
INSP 150 - Radiography Level I Theory Exam
Course Description:
SAIT offers this Radiography Level I theory exam as part of the Canadian General Standards Board examination process for non-destructive testing (NDT).
0 credits
Required Materials
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
Technical Requirements
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
INSP 152 - Radiography Level I Practical Exam
Course Description:
SAIT offers this Radiography Level I practical exam as part of the Canadian General Standards Board examination process for non-destructive testing (NDT).
0 credits
Required Materials
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
Technical Requirements
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
INSP 154 - Radiography Level II Theory Exam
Course Description:
SAIT offers this Radiography Level II theory exam as part of the Canadian General Standards Board examination process for non-destructive testing (NDT).
0 credits
Required Materials
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
Technical Requirements
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
INSP 156 - Radiography Level II Practical Exam
Course Description:
SAIT offers this Radiography Level II practical exam as part of the Canadian General Standards Board examination process for non-destructive testing (NDT).
0 credits
Required Materials
CONTINUING EDUCATION CALENDARExams are available Monday to Friday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ndt@sait.ca
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
INSP 158 - Radiography Level III Theory Exam
Course Description:
SAIT offers this Radiography Level III theory exam as part of the Canadian General Standards Board examination process for non-destructive testing (NDT).
0 credits
Required Materials
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
Technical Requirements
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
INSP 160 - Eddy Current Level I Theory Exam
Course Description:
SAIT offers this Eddy Current Level I theory exam as part of the Canadian General Standards Board examination process for non-destructive testing (NDT).
0 credits
Required Materials
CONTINUING EDUCATION CALENDARExams are available Monday to Friday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ndt@sait.ca
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
INSP 162 - Eddy Current Level I Practical Exam
Course Description:
SAIT offers this Eddy Current Level I practical exam as part of the Canadian General Standards Board examination process for non-destructive testing (NDT).
0 credits
Required Materials
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
Technical Requirements
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
INSP 164 - Eddy Current Level II Theory Exam
Course Description:
SAIT offers this Eddy Current Level II theory exam as part of the Canadian General Standards Board examination process for non-destructive testing (NDT).
0 credits
Required Materials
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
Technical Requirements
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
INSP 166 - Eddy Current Level II Practical Exam
Course Description:
SAIT offers this Eddy Current Level II practical exam as part of the Canadian General Standards Board examination process for non-destructive testing (NDT).
0 credits
Required Materials
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
Technical Requirements
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
INSP 168 - Eddy Current Level III Theory Exam
Course Description:
SAIT offers this Eddy Current Level III theory exam as part of the Canadian General Standards Board examination process for non-destructive testing (NDT).
0 credits
Required Materials
CONTINUING EDUCATION CALENDARExams are available Monday to Friday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ndt@sait.ca.
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
INSP 170 - Radiation Safety Device Operator Theory Exam
Course Description:
SAIT offers this Radiation Safety Device Operator theory exam as part of the Canadian General Standards Board examination process for non-destructive testing (NDT).
0 credits
Required Materials
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
Technical Requirements
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
INSP 171 - Radiation Protection Exam
Course Description:
SAIT offers this Radiation Protection exam as part of the Canadian General Standards Board examination process for non-destructive testing (NDT).
0 credits
Required Materials
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
Technical Requirements
Exams are available Monday to Thursday by appointment.
For further information or to make an appointment, please call 403.210.4344 or email ma.info@sait.ca
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
ROBT 003 - Microcontroller Robotics Design and Development I
Course Description:
This course will introduce students to electronic fabrication and basic microcontroller programming as students build a complete gearbox, solder together an electronics circuit board, and modify and download code to an ATMEL microcontroller robot. The goal of this class is to produce a competitive robot for the internationally known Robot Sumo Wrestling competition. Students take home the robot at completion.
0 credits
© 2015 - 2020, Southern Alberta Institute of Technology (SAIT). All Rights Reserved.
Print this Page